LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2020 >> Avalon Limited >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (Service Information) [2GR-FKS] >> Oil Pressure Switch >> Removal [04/2018 - ] >> Procedure

Removal [04/2018 - ]: Procedure

  1. REMOVE FRONT FENDER APRON SEAL RH 

    Refer to PROCEDURE - Step 13 [04/2018 - 08/2021] , or refer to PROCEDURE - Step 13 [08/2021 - ]

  2. DRAIN ENGINE OIL 

    Refer to PROCEDURE - Step 5 [04/2018 - 08/2021] , or refer to PROCEDURE - Step 5 [08/2021 - ]

  3. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY 
    1. Disengage the clamp to disconnect the wire harness protector.
      GTY765569Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Wire Harness Protector
    2. Disconnect the engine oil pressure switch assembly connector.
    3. Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.
      GTY761250Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals