LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transaxle System [UA80E] (Service Information)) >> Speed Sensor >> Removal [08/2016 - ] >> Procedure

Removal [08/2016 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE TRANSMISSION WIRE 

    Refer to REMOVAL [08/2016 - ] 

  2. REMOVE TRANSMISSION VALVE BODY ASSEMBLY 

    See step  2

  3. REMOVE TRANSMISSION REVOLUTION SENSOR (NT) 
    1. Remove the bolt and transmission revolution sensor (NT) from the automatic transaxle case sub-assembly.
      GTY694192Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE TRANSMISSION REVOLUTION SENSOR (NC) 
    1. Remove the bolt and transmission revolution sensor (NC) from the counter drive gear sub-assembly.
      GTY694201Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals