Inspection [12/2015 - 08/2016]: Procedure
WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
- Inspect the fuel pump resistance.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
TEXT IN ILLUSTRATION
| *a |
Component without harness connected
(Fuel Suction with Pump and Gauge Tube Assembly) |
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
| Tester Connection |
Condition |
Specified Condition |
| 4 - 5 |
20°C (68°F) |
0.2 to 3.0 Ω |
If the result is not as specified, replace the fuel suction with pump and gauge tube assembly.