Inspection [12/2015 - 08/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT FUEL SENDER GAUGE ASSEMBLY

Check the fuel sender gauge resistance.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

TEXT IN ILLUSTRATION

Component without harness connected
(Fuel Sender Gauge Assembly)

Check that the float moves smoothly between the F level (upper end) and E level (lower end).

Measure the resistance according to the value(s) in the table below.

Standard Resistance

Tester Connection	Float Level	Float Position (mm (in.))	Specified Condition
1 - 2	F	114.2 (4.496)	13.5 to 16.5 Ω
	1/2	66.1 (2.602)	202 to 223 Ω
	E	0 (0)	405.5 to 414.5 Ω

If the result is not as specified, replace the fuel sender gauge assembly.