LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Fuel System [2GR-FE] (Service Information)) >> Fuel Pump Resistor >> Removal [12/2015 - 08/2016] >> Procedure

Removal [12/2015 - 08/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FUEL PUMP RESISTOR 
    1. Disconnect the connector.
      GTY307560Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the nut and fuel pump resistor.
scientia non olet · About LEMON Manuals