LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Fuel System [2GR-FE] (Service Information)) >> Fuel Pump Resistor >> Installation [12/2015 - 08/2016] >> Procedure

Installation [12/2015 - 08/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FUEL PUMP RESISTOR 
    1. Install the fuel pump resistor with the nut.

      Torque: 7.0 N*m (71 kgf*cm, 62 in.*lbf) 

    2. Connect the connector.
scientia non olet · About LEMON Manuals