LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Fuel System [2GR-FE] (Service Information)) >> Fuel Pressure Regulator >> Installation [12/2015 - 08/2016] >> Procedure

Installation [12/2015 - 08/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY 
    1. Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.
    2. Install the fuel pressure regulator assembly to the fuel filter.
  2. INSTALL FUEL PUMP WITH FILTER ASSEMBLY 

    See step  1

  3. INSTALL FUEL SENDER GAUGE ASSEMBLY 

    See step  1

  4. INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY 

    (Refer to INSTALLATION [12/2015 - 08/2016] )

scientia non olet · About LEMON Manuals