LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Automatic Transaxle System [U660F] (Service Information)) >> TRANSMISSION WIRE(When Not Using the Engine Support Bridge) >> Removal [12/2015 - 08/2016] >> Procedure

Removal [12/2015 - 08/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY 

    (Refer to REMOVAL [12/2015 - 08/2016] )

  2. REMOVE TRANSMISSION WIRE 
    1. Disconnect the 9 connectors.
      GTY323476Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp and disconnect the transmission wire.
    3. Remove the bolt, lock plate and transmission wire from the transmission valve body.
      GTY321101Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals