Removal [12/2015 - 08/2016]: Procedure
WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE VALVE BODY OIL STRAINER ASSEMBLY
(Refer to REMOVAL [12/2015 - 08/2016] )
- REMOVE ATF TEMPERATURE SENSOR (TRANSMISSION WIRE)
- Disconnect the connector.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
TEXT IN ILLUSTRATION
- Disengage the clamp and disconnect the transmission wire.
- Remove the 4 bolts, wire harness clamp and ATF temperature sensor from the transmission valve body assembly.
- Remove the O-ring from the ATF temperature sensor.
 Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|