Removal [12/2015 - 08/2016]: Procedure

(Refer to REMOVAL [12/2015 - 08/2016] )

See step  7

1. Remove the 18 bolts and automatic transaxle oil pan from the automatic transaxle.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   Some fluid will remain in the automatic transaxle oil pan. Remove all the bolts, and carefully remove the automatic transaxle oil pan.

1. Remove the automatic transaxle oil pan gasket.

1. Remove the 2 transmission oil cleaner magnets from the automatic transaxle oil pan.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   TEXT IN ILLUSTRATION
   
   

   *1	Oil Cleaner Magnet

2. Examine particles in the automatic transaxle oil pan.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   1. Collect any steel chips with the removed magnets. Look carefully at the chips and particles in the automatic transaxle oil pan and on the transmission oil cleaner magnets to see the type of wear which might be found in the automatic transaxle.

      Result

      Steel (magnetic) 

      Bearing, gear and plate wear

      Brass (non-magnetic) 

      Bushing wear

1. Remove the 2 bolts and valve body oil strainer from the transmission valve body.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Remove the O-ring from the valve body oil strainer.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the 11 bolts and transmission valve body from the automatic transaxle.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   When removing the transmission valve body, be careful not to allow the transmission revolution sensor and the transaxle case to interfere with each other.

1. Remove the 2 transaxle case gaskets from the transaxle case.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the manual valve from the transmission valve body.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002