LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Automatic Transaxle System [U660E] (Service Information)) >> Shift Lever >> Reassembly [12/2015 - 08/2016] >> Procedure

Reassembly [12/2015 - 08/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL LOWER POSITION INDICATOR HOUSING 
    1. Put the guide in position and engage the 2 claws to install the lower position indicator housing to the shift lock control unit assembly.
      GTY732944Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 2 POSITION INDICATOR SLIDE COVER 
    1. Install the No. 2 position indicator slide cover to the position indicator slide cover.
      GTY727269Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL POSITION INDICATOR SLIDE COVER 
    1. Install the position indicator slide cover to the lower position indicator housing as shown in the illustration.
      GTY727271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL UPPER POSITION INDICATOR HOUSING 
    1. Engage the 4 claws to install the upper position indicator housing to the lower position indicator housing.
      GTY723628Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY 
    1. Engage the 3 claws to install the shift lock control ECU sub-assembly to the shift lock control unit assembly.
      GTY723630Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connector.
  6. INSTALL POSITION INDICATOR LED 
    1. Engage the claw to install the position indicator LED to the lower No. 2 position indicator housing.
      GTY726049Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. INSTALL POSITION INDICATOR LIGHT GUIDE 
    1. Engage the 4 claws to install the position indicator light guide to the lower No. 2 position indicator housing.
      GTY739620Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. INSTALL LOWER NO. 2 POSITION INDICATOR HOUSING 
    1. Engage the 5 claws to install the lower No. 2 position indicator housing to the floor shift position indicator housing sub-assembly.
      GTY726050Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY 
    1. Connect the connector and engage 2 clamps to install the indicator light wire sub-assembly to the lower No. 2 position indicator housing.
      GTY726051Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. INSTALL SHIFT LEVER CAP 
    1. Install the shift lever cap to the floor shift position indicator housing sub-assembly.
      GTY739621Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals