LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Automatic Transaxle System [U660E] (Service Information)) >> SPEED SENSOR(When Using the Engine Support Bridge) >> Removal [12/2015 - 08/2016] >> Procedure

Removal [12/2015 - 08/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY 

    (Refer to REMOVAL [12/2015 - 08/2016] )

  2. REMOVE TRANSMISSION REVOLUTION SENSOR 
    1. Disconnect the connector.
    2. Remove the 2 bolts and transmission revolution sensor from the transmission valve body assembly.
      GTY129994Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals