LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Automatic Transaxle System [U660E] (Service Information)) >> Park / Neutral Position Switch >> On-Vehicle Inspection [12/2015 - 08/2016] >> Procedure

On-Vehicle Inspection [12/2015 - 08/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT PARK/NEUTRAL POSITION SWITCH OPERATION 
    1. Apply the parking brake and turn the ignition switch to ON.
    2. Step on the brake pedal and check that the engine starts when the shift lever is in N or P, but does not start in the other positions.
    3. Check that the back-up lights illuminate when the shift lever is in R, and that they do not illuminate with the shift lever in the other positions.
scientia non olet · About LEMON Manuals