LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Control System [2GR-FE] (Service Information)) >> Knock Sensor >> Removal [12/2015 - 08/2016] >> Procedure

Removal [12/2015 - 08/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INTAKE MANIFOLD 

    (Refer to REMOVAL [12/2015 - 08/2016] )

  2. REMOVE KNOCK SENSOR 
    1. Disconnect the 2 knock sensor connectors.
      GTY146483Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and 2 knock sensors.
scientia non olet · About LEMON Manuals