Typical Enabling Conditions
WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
ALL
| Monitor runs whenever following DTCs are not present | None |
| All of the following conditions are met | - |
| Battery voltage | 10.5 V or more |
| Ignition switch | ON |
| Starter | Off |
CASE 3
| One of the following conditions is met: | (a), (b), (c) or (d) |
| (a) Park position switch | ON |
| (b) Neutral position switch | ON |
| (c) Park/neutral position switch | ON |
| (d) R range position switch | ON |