LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Control System [2GR-FE] - Diagnostic Codes (2 Of 3)) >> SFI System >> DTC P050A: Cold Start Idle Air Control System Performance [12/2015 - 08/2016] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Inspect the fuses for circuits related to this system before performing the following inspection procedure.

HINT: 

Read freeze frame data using the Techstream. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was running or stopped, whether the engine was warmed up or not, whether the air fuel ratio was lean or rich, as well as other data recorded at the time of a malfunction.