LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Lubrication System [2GR-FE] (Service Information)) >> Oil Pump >> Disassembly [12/2015 - 08/2016] >> Procedure

Disassembly [12/2015 - 08/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE OIL PUMP RELIEF VALVE 
    1. Using a 27 mm socket wrench, remove the relief valve plug.
      GTY298868Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the relief valve spring and oil pump relief valve.
  2. REMOVE OIL PUMP COVER 
    1. Remove the 8 bolts, oil pump cover and oil pump rotor set.
      GTY146414Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals