DTC P2610: ECM / PCM Internal Engine Off Timer Performance [12/2015 - 08/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.

REPLACE ECM
1. Replace the ECM (Refer to REMOVAL [12/2015 - 08/2016] ).
Result:

NEXT

See step 2
CHECK WHETHER DTC OUTPUT RECURS
1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Clear the DTCs (Refer to DTC CHECK / CLEAR [12/2015 - 08/2016] ).
5. Start the engine and wait for 10 minutes or more.
6. Enter the following menus: Powertrain / Engine / Trouble Codes.
7. Read pending DTCs.
  HINT:
  
  If no pending DTC is displayed, the repair has been successfully completed.
Result:

NEXT

END