LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System [2GR-FE] - Diagnostic Codes (3 Of 3) & Circuit Tests) >> SFI System >> DTC P2121: Throttle / Pedal Position Sensor / Switch "D" Circuit Range / Performance [12/2015 - 08/2016] >> Description

DTC P2121: Throttle / Pedal Position Sensor / Switch "D" Circuit Range / Performance [12/2015 - 08/2016]: Description

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.

HINT: 

Refer to DTC P2120 (Refer to DESCRIPTION ).

DTC No. DTC Detection Condition Trouble Area
P2121 Either of following conditions 1 or 2 met for 0.5 seconds
(1 trip detection logic)
1. Difference between VPA and VPA2 is less than 0.4 V, or higher than 1.2 V. (learned value of accelerator off position)
2. Difference between VPA and VPA2 is greater than or equal to the specified value.
  • Accelerator pedal sensor assembly
  • ECM