LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Emission Control System [2GR-FE] (Service Information)) >> Fuel Tank Cap >> Inspection [12/2015 - 08/2016] >> Procedure

Inspection [12/2015 - 08/2016]: Procedure

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT FUEL TANK CAP ASSEMBLY 
    1. Check the appearance of the fuel tank cap assembly.
      1. Check that there is no deformation or damage to the fuel tank cap assembly or fuel tank cap gasket.
        GTY234439Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        TEXT IN ILLUSTRATION

        *1 Fuel Tank Cap Gasket

        If there is any deformation or damage, replace the fuel tank cap assembly or fuel tank cap gasket.

        NOTE:

        Confirm that ID mark S is printed on the replacement fuel tank cap assembly.

        GTY440389Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        TEXT IN ILLUSTRATION

        *a ID Mark