LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical [2GR-FKS] (Service Information) >> Drive Belt >> Removal [08/2016 - ] >> Procedure

Removal [08/2016 - ]: Procedure

  1. REMOVE FRONT WHEEL RH 
  2. REMOVE FRONT FENDER APRON SEAL RH 

    See step  10

  3. REMOVE FAN AND GENERATOR V BELT 
    1. Release the fan and generator V belt tension by turning the V-ribbed belt tensioner assembly counterclockwise.
      GTY695051Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Turn the V-ribbed belt tensioner assembly counterclockwise to align its holes, and then insert a 5 mm hexagon wrench to secure the V-ribbed belt tensioner assembly.
    3. Remove the fan and generator V belt from the V-ribbed belt tensioner assembly.
scientia non olet · About LEMON Manuals