Removal [11/2017 - ]: Procedure

1. Slide the rain sensor cover.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Disengage the 3 claws and remove the rain sensor cover.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disconnect the rain sensor connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Stopper

2. Slide the stopper as shown in the illustration.
3. Disengage the 4 claws and remove the rain sensor as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT: 

This step should be performed only when the rain sensor tape needs to be replaced.

1. Remove the rain sensor tape.