LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Int) (Service Information) >> Vanity Light >> Removal [12/2015 - ] >> Procedure

Removal [12/2015 - ]: Procedure

  1. REMOVE VISOR ASSEMBLY 
    1. Using a moulding remover D, disengage the 4 claws to remove the visor bracket cover.
      GTY478101Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *a Moulding Remover D
    2. Remove the 2 screws.
      GTY482658Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the guide and claw to separate the visor assembly.
    4. Disconnect the connector to remove the visor assembly.
scientia non olet · About LEMON Manuals