LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Combination Meter (Service Information) >> Combination Meter >> Installation [12/2015 - ] >> Procedure

Installation [12/2015 - ]: Procedure

  1. INSTALL COMBINATION METER ASSEMBLY 
    1. Connect the 2 connectors.
    2. Engage the 2 guides and 2 clips to install the combination meter assembly.
    3. Install the 2 screws.
  2. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL 
    1. Engage the 9 clips and 3 guides to install the No. 1 instrument cluster finish panel.
  3. INSTALL NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 46 [12/2015 - 11/2017] Refer to PROCEDURE - Step 45 [11/2017 - ]

  4. INSTALL STEERING WHEEL ASSEMBLY 

    (Refer to INSTALLATION [12/2015 - ] )

scientia non olet · About LEMON Manuals