Steering Angle Sensor Communication Stop Mode [11/2017 - ]: Description

Detection Item

Symptom

Trouble Area

Steering Angle Sensor Communication Stop Mode

Either condition is met:

Communication stop for "Spiral cable (Steering Angle Sensor)" is indicated on the "Communication Bus Check" screen of the Techstream.
Refer to PROBLEM SYMPTOMS TABLE [11/2017 - 08/2018] , or refer to PROBLEM SYMPTOMS TABLE [08/2018 - ]

Communication system DTCs (DTCs that start with U) that correspond to "Steering Angle Sensor Communication Stop Mode" in "DTC Combination Table" are output.
Refer to DTC CHECK / CLEAR [11/2017 - ]

Power source circuit of steering angle sensor (spiral cable with sensor sub-assembly)
Steering angle sensor (spiral cable with sensor sub-assembly) ground circuit

Steering angle sensor (spiral cable with sensor sub-assembly) branch wire or connector
Steering angle sensor (spiral cable with sensor sub-assembly)