LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna SE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Can Communication System - Diagnostic Codes (2 Of 2) & Circuit Tests (1 Of 3) >> Can Communication System >> Circuit Tests >> Radio Receiver Assembly Communication Stop Mode [12/2015 - 11/2017] >> Description

Radio Receiver Assembly Communication Stop Mode [12/2015 - 11/2017]: Description

Detection Item Symptom Trouble Area
Radio Receiver Assembly Communication Stop Mode
  • "Display and Navigation (AVN1)" is not displayed on "CAN Bus Check" screen of Techstream
  • Applies to "Radio Receiver Assembly Communication Stop Mode" in "DTC combination table"
  • Power source or inside radio and display receiver assembly
  • Radio and display receiver assembly branch wire and connector
  • Radio and display receiver assembly

HINT: 

For radio and display type only.

scientia non olet · About LEMON Manuals