Radio Receiver Assembly Communication Stop Mode [11/2017 - ]: Description

Detection Item	Symptom	Trouble Area
Radio Receiver Assembly Communication Stop Mode	Either condition is met: Communication stop for "Display" is indicated on the "Communication Bus Check" screen of the Techstream. Refer to PROBLEM SYMPTOMS TABLE [11/2017 - 08/2018] , or refer to PROBLEM SYMPTOMS TABLE [08/2018 - ] Communication system DTCs (DTCs that start with U) that correspond to "Radio and Display Receiver Assembly Communication Stop Mode" in "DTC Combination Table" are output. Refer to DTC COMBINATION TABLE [11/2017 - 08/2018] , or refer to DTC COMBINATION TABLE [08/2018 - ]	Power source or inside radio and display receiver assembly Radio and display receiver assembly ground circuit Radio and display receiver assembly branch wire and connector Radio and display receiver assembly