Typical Malfunction Thresholds

When either condition below is met: Condition (A) or (B)

Condition (A) 

1. Any two of the following conditions are met:	Conditions 1, 2 and 3
   1. One of the following conditions is met:	Conditions (a), (b) or (c)
   (a) P position switch	ON
   (b) N position switch	ON
   (c) Park/neutral position switch (NSW)	ON
   2. R position switch	ON
   3. D position switch	ON

Condition (B) 

1. All of following conditions are met:	-
   P position switch	OFF
   N position switch	OFF
   Park/neutral position switch (NSW)	OFF
   R position switch	OFF
   D position switch	OFF