On-Vehicle Inspection [08/2016 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.

INSPECT PARK/NEUTRAL POSITION SWITCH OPERATION
1. Turn the ignition switch to ON.
2. Depress the brake pedal and check that the engine starts when the shift lever is in N or P, but does not start in any other position.
3. Check that the back-up lights come on when the shift lever is moved to R, but do not come on with the shift lever in any other position.
  If the operation is not as specified, check the park/neutral position switch.
  
  Refer to ADJUSTMENT [08/2016 - ]