LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System [2GR-FE] - Diagnostic Codes (3 Of 3) & Circuit Tests) >> SFI System >> DTC P219A: Bank 1 Air-Fuel Ratio Imbalance; DTC P219B: Bank 2 Air-Fuel Ratio Imbalance; DTC P219C: Cylinder 1 Air-Fuel Ratio Imbalance; DTC P219D: Cylinder 2 Air-Fuel Ratio Imbalance; DTC P219E: Cylinder 3 Air-Fuel Ratio Imbalance; DTC P219F: Cylinder 4 Air-Fuel Ratio Imbalance; DTC P21A0: Cylinder 5 Air-Fuel Ratio Imbalance; DTC P21A1: Cylinder 6 Air-Fuel Ratio Imbalance [12/2015 - 08/2016] >> Typical Malfunction Thresholds

Typical Malfunction Thresholds

WARNING: This page is about a different car, the 2016 Toyota Sienna. However, it is still accessible from the selected car via links, so may be relevant.
P219A AND P219B: AIR FUEL RATIO SENSOR MONITORING METHOD

Air fuel ratio sensor monitoring method criteria (rich side imbalance) 0.123 or more (for 2WD (bank 1))
0.12715 or more (for 4WD (bank 1))
0.1155 or more (for 2WD (bank 2))
0.13165 or more (for 4WD (bank 2))
P219C, P219D, P219E, P219F, P21A0 AND P21A1: CRANKSHAFT POSITION SENSOR MONITORING METHOD

Crankshaft position sensor monitoring method criteria (lean side imbalance) 1 or more