LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna Limited, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System [2GR-FKS] (Service Information) >> VACUUM SWITCHING VALVE(for Engine Mounting) >> Removal [08/2016 - ] >> Procedure

Removal [08/2016 - ]: Procedure

  1. REMOVE AIR CLEANER INLET ASSEMBLY 

    Refer to PROCEDURE - Step 20

  2. REMOVE DUTY VACUUM SWITCHING VALVE 
    1. Disconnect the duty vacuum switching valve connector.
      GTY722824Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the wire harness clamp.
    3. Disconnect the 3 vacuum hoses and hose from the duty vacuum switching valve.
      GTY722765Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the bolt and duty vacuum switching valve.
      GTY722809Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals