LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna Limited, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) (Service Information) >> Brake Pedal >> Reassembly [12/2015 - ] >> Procedure

Reassembly [12/2015 - ]: Procedure

  1. INSTALL STOP LIGHT SWITCH CUSHION 
    1. Install the stop light switch cushion to the brake pedal support assembly.
  2. INSTALL BRAKE PEDAL PAD 
    1. Install the brake pedal pad to the brake pedal support assembly.
  3. INSTALL BRAKE PEDAL RETURN SPRING 
    1. Install the brake pedal return spring to the brake pedal support assembly.
      GTY727377Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals