LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna Limited, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) (Service Information) >> Brake Pedal >> Disassembly [12/2015 - ] >> Procedure

Disassembly [12/2015 - ]: Procedure

  1. REMOVE BRAKE PEDAL RETURN SPRING 
    1. Remove the brake pedal return spring from the brake pedal support assembly.
      GTY727377Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE BRAKE PEDAL PAD 
    1. Remove the brake pedal pad from the brake pedal support assembly.
  3. REMOVE STOP LIGHT SWITCH CUSHION 
    1. Remove the stop light switch cushion from the brake pedal support assembly.
scientia non olet · About LEMON Manuals