LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sienna Limited, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio / Video System (Service Information) >> Radio Receiver >> Removal [11/2017 - ] >> Procedure

Removal [11/2017 - ]: Procedure

  1. REMOVE NO. 1 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY 

    (Refer to PROCEDURE - Step 15 )

  2. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL 

    (Refer to PROCEDURE - Step 16 )

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 

    (Refer to PROCEDURE - Step 12 )

  4. REMOVE AIR CONDITIONING CONTROL ASSEMBLY 

    (Refer to PROCEDURE - Step 3 )

  5. REMOVE POSITION INDICATOR HOUSING ASSEMBLY 

    (Refer to PROCEDURE - Step 13 )

  6. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    (Refer to PROCEDURE - Step 28 )

  7. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET 
    1. Remove the 4 bolts.
      GTY473104Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 3 guides.
    3. Disconnect the connectors to remove the radio receiver assembly with bracket.
  8. REMOVE NO. 1 RADIO RECEIVER BRACKET (w/o Navigation System) 
    GTY473105Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the 3 bolts and No. 1 radio bracket.
  9. REMOVE NO. 2 RADIO RECEIVER BRACKET (w/o Navigation System) 
    GTY473102Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the 3 bolts and No. 2 radio bracket.
  10. REMOVE NAVIGATION WIRE (w/ Navigation System) 

    (Refer to PROCEDURE - Step 2 )

  11. REMOVE NO. 1 RADIO RECEIVER BRACKET (w/ Navigation System) 

    (Refer to PROCEDURE - Step 3 )

  12. REMOVE NO. 2 RADIO RECEIVER BRACKET (w/ Navigation System) 

    (Refer to PROCEDURE - Step 4 )

  13. REMOVE NAVIGATION ECU (w/ Navigation System) 

    (Refer to PROCEDURE - Step 5 )

scientia non olet · About LEMON Manuals