LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension (Service Information) >> Rear Shock Absorber >> Disposal [08/2015 - 08/2018] >> Procedure

Disposal [08/2015 - 08/2018]: Procedure

  1. DISPOSE OF SHOCK ABSORBER ASSEMBLY REAR 
    1. Fully extend the shock absorber rod.
      GTY557380Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a drill, make a hole in the cylinder somewhere between A and B, as shown in the illustration, to discharge the gas inside.
      WARNING:
      • Be careful of flying metal shards when drilling. Always use proper safety equipment.
      • The gas is colorless, odorless and nontoxic.
scientia non olet · About LEMON Manuals