LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension (Service Information) >> Rear Pneumatic Cylinder >> Inspection [08/2015 - ] >> Procedure

Inspection [08/2015 - ]: Procedure

  1. INSPECT ROLLING DIAPHRAGM 
    GTY541900Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Lift up the dust cover and check that the rolling diaphragm is not damaged or cracked.

      If damage or cracks exist, replace the pneumatic cylinder.

    2. Return the dust cover back to the original position.
scientia non olet · About LEMON Manuals