LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension (Service Information) >> REAR LOWER ARM (for No. 1 Arm) >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE REAR SHOCK ABSORBER ASSEMBLY LH 

    (Refer to REMOVAL [08/2015 - 08/2018] , or refer to REMOVAL [08/2018 - ] )

  2. REMOVE NO. 1 REAR SUSPENSION ARM ASSEMBLY LH 
    GTY544344Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Put matchmarks on the No. 1 rear suspension arm and adjust cam.
    2. Remove the 3 bolts and 3 nuts and remove the No. 1 rear suspension arm.
scientia non olet · About LEMON Manuals