LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Control System (Service Information) >> Height Control Sensor >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH 
    GTY576607Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Put matchmarks on the rear height control sensor link and bracket.
    2. Remove the nut and disconnect the rear height control sensor link.
    3. Disconnect the rear height control sensor connector.
      GTY610725Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the nut and the rear height control sensor.
scientia non olet · About LEMON Manuals