DTC B1825-56: Short in Front Passenger Side - Side Squib Circuit; DTC B1826-56: Open in Front Passenger Side - Side Squib Circuit; DTC B1827-56: Short to GND in Front Passenger Side - Side Squib Circuit; DTC B1828-56: Short to B+ in Front Passenger Side - Side Squib Circuit [08/2015 - 08/2017]: Description
The side squib RH circuit consists of the center airbag sensor and the front seat side airbag RH.
This circuit instructs the SRS to deploy when deployment conditions are met.
These DTCs are stored when a malfunction is detected in the side squib RH circuit.
| DTC Code |
Detection Condition |
Trouble Area |
| B1825-56 |
When one of following conditions is met:
- The center airbag sensor receives a line short circuit signal 5 times in the side squib RH circuit during primary check.
- Side squib RH malfunction
- Center airbag sensor malfunction
|
- No. 2 floor wire
- Front seat side airbag assembly RH (Side squib RH)
- Center airbag sensor assembly
|
| B1826-56 |
When one of following conditions is met:
- The center airbag sensor receives an open circuit signal in the side squib RH circuit for 2 seconds.
- Side squib RH malfunction
- Center airbag sensor malfunction
|
- No. 2 floor wire
- Front seat side airbag assembly RH (Side squib RH)
- Center airbag sensor assembly
|
| B1827-56 |
When one of following conditions is met:
- The center airbag sensor receives a short circuit to ground signal in the side squib RH circuit for 0.5 seconds.
- Side squib RH malfunction
- Center airbag sensor malfunction
|
- No. 2 floor wire
- Front seat side airbag assembly RH (Side squib RH)
- Center airbag sensor assembly
|
| B1828-56 |
When one of following conditions is met:
- The center airbag sensor receives a short circuit to B+ signal in the side squib RH circuit for 0.5 seconds.
- Side squib RH malfunction
- Center airbag sensor malfunction
|
- No. 2 floor wire
- Front seat side airbag assembly RH (Side squib RH)
- Center airbag sensor assembly
|