Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
[OFF malfunction]
- Both of the following conditions are met: OFF malfunction (A) and (B)
OFF MALFUNCTION (A)
| Engine speed - Turbine speed (NE - NT) | 70 RPM or more |
OFF MALFUNCTION (B)
| Turbine speed/Output speed (NT/NO) | Less than 3.11 or more than 7.58 |
[ON malfunction]
- 2 detections are necessary per driving cycle:
- 1st detection: temporary flag ON
- 2nd detection: pending fault code ON
- Vehicle speed must be under 10 km/h (6.2 mph) once before 2nd detection.
ON MALFUNCTION
| Engine speed - Turbine speed (NE - NT) | Less than 35 RPM |