LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transmission (Ab60E) - Diagnostic Codes (2 Of 2) & Circuit Tests) >> Automatic Transmission System >> DTC P0979: Shift Solenoid "C" Control Circuit Low (Shift Solenoid Valve S3); DTC P0980: Shift Solenoid "C" Control Circuit High (Shift Solenoid Valve S3) [08/2015 - 08/2017] >> Caution / Notice / Hint

Caution / Notice / Hint

WARNING: This page is about a different variant/trim than selected.
NOTE:

Perform the universal trip to clear permanent DTCs (Refer to DTC CHECK / CLEAR [08/2015 - 08/2019] ).

HINT: 

The shift solenoid valve S3 is turned ON/OFF normally when the shift lever is in D:

ECM gear shift command 1st 2nd 3rd 4th 5th 6th
Shift solenoid valve S3 ON ON ON OFF OFF OFF