Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
[P0894: ON malfunction]
- When either condition below is met: ON malfunction (A) or (B)
ON MALFUNCTION (A)
| Summation of C1 clutch heat generations | Specified value |
ON MALFUNCTION (B)
| Summation of C2 clutch heat generations | Specified value |
| Actual gear for SLT failure judgment | Not determined |
[P2714: ON malfunction]
- One of the following conditions is met: ON malfunction (A), (B), (C), (D), (E), (F), (G) or (H)
ON MALFUNCTION (A)
| Summation of C1 clutch heat generations | Specified value |
ON MALFUNCTION (B)
| Shift solenoid valve S1 OFF malfunction | Detected |
ON MALFUNCTION (C)
| Shift solenoid valve S2 OFF malfunction | Detected |
ON MALFUNCTION (D)
| Shift solenoid valve S3 ON malfunction | Detected |
ON MALFUNCTION (E)
| Shift solenoid valve S4 OFF malfunction | Detected |
ON MALFUNCTION (F)
| 1-2 shift valve malfunction | Detected |
ON MALFUNCTION (G)
| Reverse sequence valve malfunction | Detected |
ON MALFUNCTION (H)
| Shift solenoid valve SL2 ON malfunction | Detected |