DTC P0894: Transmission Component Slipping; DTC P2714: Pressure Control Solenoid "D" Performance (Shift Solenoid Valve SLT) [08/2017 - 08/2019]: Description
WARNING: This page is about a different variant/trim than selected.
Shift solenoid valve SLT controls the transmission line pressure for smooth transmission operation based on signals from the throttle position sensor and vehicle speed sensor. The ECM adjusts the current to shift solenoid valve SLT to control the hydraulic line pressure coming from the primary regulator valve. Appropriate line pressure assures smooth shifting with varying engine outputs.
| DTC Code | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0894 | The ECM detects a malfunction on SLT, S1, S2, S3, S4, SL2, gear 6 incorrect ratio (sequence valve) or 1-2 shift solenoid valve according to the revolution difference of the turbine and the output shaft, and also by the oil pressure. (2-trip detection logic) |
|
| P2714 | The ECM detects a malfunction on SLT (ON side) according to the revolution difference of the turbine and the output shaft, and also by the oil pressure (2 trip detection logic) |
|