Typical Enabling Conditions

P0712: Range check (Low voltage) 

1. The monitor will run whenever the following DTCs are not present

   None

P0713: Range check (High voltage) 

1. One of the following conditions is met: Condition (A) or (B)

   Condition (A) 

   1. The monitor will run whenever this DTC is not present	P0115, P0117, P0118 (ECT (Engine coolant temperature) sensor circuit) P00AC, P00AD, P0110, P0112, P0113 (IAT (Intake air temperature) sensor circuit)
      Engine coolant temperature or intake air temperature at engine start	-29.375°C (-20.875°F) or less
      Time after engine start	388 seconds or more

   Condition (B) 

   1. The monitor will run whenever this DTC is not present	P0115, P0117, P0118 (ECT (Engine coolant temperature) sensor circuit) P00AC, P00AD, P0110, P0112, P0113 (IAT (Intake air temperature) sensor circuit)
      Engine coolant temperature and intake air temperature at engine start	Higher than -29.375°C (-20.875°F)
      Time after engine start	10 seconds or more