DTC P0711: Transmission Fluid Temperature Sensor "A" Performance [08/2015 - 10/2016]: Procedure

1. Connect the Techstream to the DLC3.
2. Turn the ignition switch to ON.
3. Turn the Techstream on.
4. Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
5. Read the DTCs using the Techstream.
   RESULT
   
   

   Result	Proceed to
   Only P0711 is output	A
   P0711 and other DTCs are output	B

   HINT: 

   If any other codes besides P0711 are output, perform troubleshooting for those DTCs first.

Result: 

B 

GO TO DTC CHART 

Refer to:DIAGNOSTIC TROUBLE CODE CHART [08/2015 - 08/2017]

Result: 

A 

See step  2

1. Check the transmission fluid level. Refer to: ADJUSTMENT [08/2015 - 08/2017]

   OK

   Automatic transmission fluid level is correct.

Result: 

OK 

REPAIR OR REPLACE NO. 1 TRANSMISSION WIRE 

Refer to:REMOVAL [08/2015 - ]

Result: 

NG 

ADD FLUID 

Refer to:ADJUSTMENT [08/2015 - 08/2017]