Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
- One of the following conditions is met: Condition (A), (B) or (C)
Condition (A)
- When 2 or more of the following signals are input at the same time
One of the following conditions is met
P switch
N switch
NSW switchON R switch ON D switch ON
Condition (B)
- When the shift lever is in S, one of the following conditions is met
P switch ON N switch ON NSW switch ON R switch ON
Condition (C)
- When 2 or more of the following signals are input at the same time