LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission (Ab60E) (Service Information)) >> Speed Sensor >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. REMOVE SPEED SENSOR NT 
    1. Disconnect the sensor connector.
      GTY611380Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and sensor.
    3. Remove the O-ring from the sensor.
  2. REMOVE SPEED SENSOR SP2 
    1. Disconnect the sensor connector.
      GTY603614Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and sensor.
    3. Remove the O-ring from the sensor.
scientia non olet · About LEMON Manuals