LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission (Ab60E) (Service Information)) >> Speed Sensor >> Inspection [08/2015 - ] >> Procedure

Inspection [08/2015 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSPECT SPEED SENSOR NT 
    1. Measure the resistance according to the value(s) in the table below.
      GTY583868Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 560 to 680 Ω

      If the result is not as specified, replace the sensor.

  2. INSPECT SPEED SENSOR SP2 
    1. Measure the resistance according to the value(s) in the table below.
      GTY583867Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 560 to 680 Ω

      If the result is not as specified, replace the sensor.