Adjustment [08/2015 - ]: Procedure

See step  1[08/2015 - 08/2019]

See step  1[08/2019 - ]

1. Move the shift lever to the N position.
2. Fold back the transmission control cable adjust case cover. Then while sliding the slider toward the cable end side, press the lock piece from the back side to release the lock.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

3. Check that the adjust case's spring is applying enough tension to the shift control cable. Then press the lock piece to set the lock.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   • Use your hand to push the lock piece. Do not use any tools.
   • Securely push the lock piece so that the slider's protrusion is above the lock piece.
4. Return the cover of the adjust case to its original position.
5. Inspect the operation after the adjustment.