LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2019 >> Sequoia SR5, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission (Ab60E) (Service Information)) >> Park / Neutral Position Switch >> Adjustment [08/2015 - ] >> Procedure

Adjustment [08/2015 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY 
    GTY548221Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Loosen the bolt of the park/neutral position switch and move the shift lever to N.
    2. Align the groove with the neutral basic line.
    3. Hold the switch in the position described above and tighten the bolt.

      Torque: 13 N.m (133 kgf/cm, 10 ft.lbf) 

    4. After the adjustment, perform the On-Vehicle Inspection. Refer to: ON-VEHICLE INSPECTION [08/2015 - ] ).
scientia non olet · About LEMON Manuals